Here you will find various accessories for your Hydrogen Generator. Whether it be a Fuel Heater, PCV Enhancer, vacuum hose or just wiring to hook it up, it will be here. Also if there is some sort of installation accessory that you need and it is not shown, simply contact us to see if we can help.
| I have custom made PCV Enhancers ready to install in your vehicle. These come with push on fittings so they do not require a hose clamp or anything simply cut your hose going from the PCV valve to the intake and push this on in between and your done. Very simple installation. The Enhancer is marked "In" on one side and "Out" on the other. It contains glass beads to help condense water vapor and it also has silica gel to absorb it. This will filter out water and oil from going in to your engine. A must if you are looking to keep your engine clean and running for as long as possible. | PCV Enhancer
|
| A fuel heater is used to help vaporize the gasoline and aid in combustion. Heated gasoline will vaporize easier and since it is the vapors that burn (not the liquid) this will aid in fuel economy. The better vaporization will mean a more complete combustion. It is universal and the fuel flow does not matter (no specific IN and OUT required). |
|
| Relay hookup kits. These will allow you to hookup your kit the RIGHT way and not rig it to suck power from your cars ignition circuit. This is easily added on if you are already doing that also! This unit is good for 30 amps of current draw so you can power that super generator. This is what you need so you don’t blow fuses and possibly fry your electrical system because of improper wiring. This is very cheap compared to the cost of a new vehicle after an under-hood fire. This includes a heavy duty fuse holder so that you can add your own fuse suitable to your application. ALL the needed connectors are included along with instructions for hookup. |
 |
| Stainless Steel 316L wire. This is super corrosion resistant and has become the standard for hydrogen generators. This is sold by the foot and will require a shipping charge of $5 for ANY amount. Simply add to cart then change quantity to the number of feet you need. | Stainless Steel 316L Wire |
| We also carry Vacuum Tees for splicing into existing vacuum lines in your vehicle. These have three sizes which are approx. 3/16 to 3/8. With the smaller diameter hoses they should just stay on but larger sizes hoses may require a hose clamp. |
Universal Vacuum Tee
|
